PMC / XMC based FPGA boards

Back to » FPGA Boards (Altera and Xilinx based)
4S-XMC Stratix IV GX XMC with 4 SFP Transceivers 4S-XMC Stratix IV GX XMC with 4 SFP Transceivers

- High density Altera Stratix IV GX FPGA (4SGX110/180/230/290/360)
- 4 SFP transceivers on front panel
- 8 multi-gigabit serial transceivers
- On-board oscillators for Fibre Channel, PCI Express, and Serial RapidIO
- 44 general purpose digital I/O
- On-board JTAG header or JTAG 
access via XMC J15 for Stratix IV GX debug
- One 8x PCIe, two 4x Serial RapidIO, two 10 GigE, or any other serial protocol
FM481 4 Channel sFPDP Fiber Optical PMC FM481 4 Channel sFPDP Fiber Optical PMC

- Virtex 4: XC4VFX20 or XC4VFX60 with embedded PowerPC RISC processor
- FPGA configuration on-board storage
- sFPDP IP Core
- FPGA firmware design services available upon request
- 2 x 32M x 16 DDR2 SDRAM default (up to 256MB)
- 128Mbit flash device
- PCI-X Interface
- 4x 2.5Gbps optical transceivers for sFPDP, Fibre Channel, Gigabit Ethernet and Infiniband applications and other fiber optic based communication standard protocol applications.
- PMC connector Pn4 64 user I/Os
FM489 Virtex-5 PMC-X/XMC With BLAST™ Sites FM489 Virtex-5 PMC-X/XMC With BLAST™ Sites

- High speed DSP processing in Xilinx Virtex-5 ® FPGA
   XC5VLX50T, XC5VLX85T, XC5VLX110T, XC5VSX50Tor XC5VSX95T
- Virtex-4 XC4VFX20 or XC4VFX60 with embedded PowerPC processors
- FPGA configuration on-board storage
- Off-the-shelf IP cores
- PMC and XMC
- Front Panel I/O daughter cards
- Rocket I/O Connector (4 MGTs)
-  FPGA firmware design services available upon request
FM680 Virtex 6 XMC & PMC with user definable Memory and I/O FM680 Virtex 6 XMC & PMC with user definable Memory and I/O

 FPGA :
Virtex-6 LX240T, LX365T, LX550T, SX315T, SX475T
Virtex-5 Local I/O Controller
High density Memory Options (DDR3 SDRAM, QDR2 SRAM, NAND Flash)
Onboard 128Mbit Flash ROM
XMC PCIe 4-lane
PMC 32/64-bit 33/66/133MHz Bus Interface
Front Panel I/O Daughter Cards for A/D, D/A
Consult Data Sheet for all options
User Selectable Build Options :
Configure the FM680 board to meet your requirements - QDRII SRAM, DDR2 SDRAM and DDR3 SDRAM. Optionally, JPEG2000 CODEC.
Many available I/O daughter card options - A/D, D/A, Video, LVDC.