PowerPC

Processor Support:
MPC8641D
Memory:
(2) banks of 256MB DDR2 SDRAM
128MB SDRAM local bus
(2) banks of 16MB flash, jumper selectable, one active at a time
64MB OneNAND flash file system
8KB of 8-bit EEPROM
Communication Peripherals:
(4) 10/100/1000Mb/S Ethernet ports with RJ-45 connectors
(2) RS232 ports with Mini DB9 connectors
(2) x8 PCIe connectors
Miscellaneous:
16-pin and new high-speed 52-pin JTAG connector
2×16 LCD character display
(8) user switches
Hard reset switch

One of the following Motorola PowerPC CPUs:
MPC8548E
Available memory:
256MB DDR2 SDRAM SODIMM
8MB on-board flash
64MB flash SODIMM
8KB EEPROM
128MB local bus SDRAM DIMM
Support for the following peripherals:
PCI-X controller?3.3v 64-bit PCI bus
Memory controller
Interrupt controller and timers
(2) 10/100/1000 BaseT enhanced three-speed Ethernet controllers (eTSECs) using RJ-45 connectors
(2) RS-232 interfaces using Mini DB9 connectors
PCI Express
Serial RapidIO
Hard reset via a momentary switch
Seven-segment display on CPU GPIO
User switches on CPU GPIO
16-pin and 52-pin JTAG debug connections

MPC8560/40 Microprocessors, available with the following speeds:
600MHz to 1GHz CPU
133/166 MHz DDR Bus
133MHz Local Bus
Up to 333MHz CPM
512MB DDR SDRAM SODIMM 266/333MHz (User expandable to 1GB)
128MB SDRAM DIMM
64MB Flash DIMM (User expandable to 128MB)
8MB On-board Flash
64KB EEPROM
(2) 10/100/1000BaseT Ethernet ports
10/100BaseT Ethernet ports:
(2) With the SBC8560
(1) With the SBC8540
(2) RS-232 Serial ports
External Real Time Clock
Daughter board connector with most of the CPM signals
PCI/PCI-X 32/64-bit bus running up to 133MHz, supporting Peripheral Mode Only
RapidIO 8-bit parallel bus running up to 500MHz
MPC9850 Clock Generator designed by Freescale especial for the PowerQUICC III Family
16-pin JTAG COP Interface

Core processor
MPC8347E 667MHz or MPC8349E 667MHz processor
Available memory
256MB DDR SDRAM SODIMM
8MB on-board flash
8KB EEPROM
128MB local bus SDRAM DIMM
256K-bit I2C serial EEPROM
Support for the following PowerQUICC II Pro peripherals
PCI-X controller: 3.3v 64-bit PCI bus up to 133MHz
Memory controller: up to DDR333 memory bus
Interrupt controller and timers
(2) 10/100/1000BaseT internal Ethernet MAC interfaces using RJ45 connectors
(2) RS-232 interfaces using Mini DB9 connectors
USB Host Mini A/B port
Hard reset via a momentary switch
Seven-segment display on CPU GPIO
User switches on CPU GPIO
16-pin and 52-pin JTAG debug connections

MPC7447/47 Microprocessors available with the following clock speeds:
Up to 1.264GHz CPU
133MHz Processor Bus
266MHz DDR Bus
Marvell Discovery II™ MV64360 Memory/PCI/GbE controller with support for the following external I/O peripherals:
(1) 32/64-bit PMC slot
Interface to CompactPCI backplane
(3) 10/100/1000BaseT Ethernet
(2) RS-232 Serial ports
512MB DDR SDRAM SODIMM 266MHz (user expandable to 1GB)
64MB Flash SODIMM (user expandable to 128MB)
8KB EEPROM
2MB L3 Cache (MPC7457 only)
(4) User LEDs
(4) User switches
(4) Pin GPIO header
16-pin JTAG COP Interface

Versatile E?Brain evaluation platform
Graphics, IDE and PS/2 controller on carrier board
2 digit 7 segment display for post code or user purposes
PCI slot for standard ‘universal’ (3.3V and 5V) PC-PCI extension cards
CompactFlash socket (Type 2) for Flash memory cards
6 configurable serial interfaces
EB8245 module, evaluation carrier board, Linux software and all necessary documentation and accessories

Versatile E?Brain evaluation platform
Graphics, IDE and PS/2 controller on carrier board
2 digit 7 segment display for post code or user purposes
PCI slot for standard ‘universal’ (3.3V and 5V) PC-PCI extension cards
CompactFlash socket (Type 2) for Flash memory cards
6 configurable serial interfaces
EB860 module, evaluation carrier board, Linux software and all necessary documentation and accessories

• One of the following Motorola PowerQUICC II CPUs**:
  • MPC8250/60/65/70/80
• CompactPCI 6U Double Height form factor
• The following memory systems are connected to the 60x Bus:
  • 256MB SDRAM SODIMM (user-expandable up to 512MB-page based interleaving only)
  • 64MB SIMM Flash
  • 2MB On-board Flash
• The following memory system is connected to the Local Bus:
  • 16MB SDRAM
• Real Time Clock w/8KB NvRAM using the ST M48T59Y
• 8Kb EEPROM
• Intel i8259A Interrupt Controller
• Support for the following PowerQUICC II peripherals:
  • PCI controller - 3.3v 32-bit PCI Bus up to 66MHz
  • Memory controller - up to 100MHz memory bus
  • Interrupt controller and Timers
  • Up to (3) 10/100BaseT Internal Ethernet MAC Interfaces using RJ45 connectors
  • Up to (1) 10BaseT Internal Ethernet MAC Interfaces using RJ45 connectors
  • (2) RS-232 Interfaces using Mini-DB9 connectors
• Hard reset via a momentary switch
• Memory mapped 7 Segment Display
• JTAG debug connection
• Multi-PHY ATM or (2) PCMCIA Card Slots
• 32-Bit 33/66MHz PMC/PPMC Slot on-board
• Basic Hot-swap capability using a SMH4042 Hot-swap controller and a Tundra Tsi310PCI to PCI-X Bridge
• Mailbox connector
• MPC185 Security Processor***

2 PCI slots for standard ‘universal’ (3.3V and 5V) PC-PCI extension cards
MiniPCI socket
CompactFlash socket (Type 2) for Flash memory cards
2 Fast Ethernet interfaces
4 configurable serial interfaces
EB425 module, evaluation carrier board, Linux software and all necessary documentation and accessories
Versatile E?Brain evaluation platform

2 PCI slots for standard ‘universal’ (3.3V and 5V) PC-PCI extension cards
Mini-PCI socket for standard extension cards
CompactFlash socket (Type 2) for Flash memory cards
2 Gigabit Ethernet interfaces
DVI graphics output, TTL flat panel interface
AC97 audio interface
4 serial interfaces
2 USB 2.0 interfaces, 1 host, 1 device
EB8347 module, evaluation carrier board, Linux software and all necessary documentation and accessories
Versatile E?Brain evaluation platform

2 PCI slots for standard ‘universal’ (3.3V and 5V) PC-PCI extension cards
MiniPCI socket
CompactFlash socket (Type 2) for Flash memory cards
2 Fast Ethernet interfaces
4 configurable serial interfaces
EB405 module, evaluation carrier board, Linux software and all necessary documentation and accessories
Versatile E?Brain evaluation platform

2 PCI slots for standard ‘universal’ (3.3V and 5V) PC-PCI extension cards
CompactFlash socket (Type 2) for Flash memory cards
2 Gigabit Ethernet, 1 Fast Ethernet interface
6 configurable serial interfaces
CAN interface
EB8540 module, evaluation carrier board, Linux software and all necessary documentation and accessories
Versatile E?Brain evaluation platform

2 PCI slots for standard ‘universal’ (3.3V and 5V) PC-PCI extension cards

CompactFlash socket (Type 2) for Flash memory cards
2x Gigabit Ethernet, 2x Fast Ethernet
6 configurable serial interfaces
CAN interface
EB8541 module, evaluation carrier board, Linux software and all necessary documentation and accessories
Versatile E?Brain evaluation platform