 |
Industrial Grade Compact Flash Cards
Reliable Performance in Any Environment
ATP Industrial Grade Compact Flash Cards are ruggedised flash products designed to perform consistently under conditions of extreme temperature, shock, vibration, and humidity.
ATP’s SIP (System-In-Packaging) manufacturing process encapsulates all exposed components and points of failure to ensure the products are fully waterproof, shockproof, and ESD (Electro-Static Discharge) proof. ATP Industrial Grade CF Cards can withstand at least a storage temperature range of -40oC to 85oC and an operating temperature range of -40oC to 85oC. All ATP Industrial Grade CF cards are produced under a stringent RoHs and Green Package compliant manufacturing process to guarantee a consistent high level of build quality and performance.
Being a true manufacturer gives ATP the ability to support customers with a fixed BOM policy, ensuring both consistent compatibility and performance. ATP also fully supports its customers with product customization and tuning to optimize performance in particular or specialized applications.
Specifications
| ATP Part Numbers |
AF128CFI, AF256CFI, AF512CFI,
AF1GCFI, AF2GCFI, AF4GCFI, AF8GCFI, AF16GCFI |
| Capacities |
128MB to 16GB |
| Connector Pin |
50 Pins |
| Durability |
Dust Proof: Yes
ESD Proof: Yes |
| Electrical characteristics |
Power Supply Voltage (Recommended Operation Condition): 3.0V - 3.6V, 4.5V-5.5V
Low Power Consumption (<50mA)
Clock speed: 50Mhz max. |
Environmental
Characteristics |
Operating Temp: -40C to 85C
Storage Temp: -40C to 85C
Humidity: 8 - 95 % non-condensing
Vibration: 30Gs peak-to-peak Max
Shock: 3,000G Max |
| Performance |
Transfer Speed: Up to 45MB/sec (300x) (UDMA mode 5) |
| True IDE (fixed disk) Mode Compatibility |
PIO: Up to Mode 6
(U)DMA: Up to Mode 5 |
| Reliability |
MTBF (mean time between failures): 2,000,000 hours
Number of insertions: 20,000 minimum
Data retention: 10 years
Endurance: >2,000,000 cycles (read/write and erase)
ECC: 4-bit
Reserve/Bad Block Management |
| Physical characteristics |
Length:36.4mm 0.15mm
Width: 42.8mm 0.10mm
Thickness: 3.3mm 0.10mm
Weight: 9.0 gram typical |
Fixed Disk/True IDE Compatibility
ATP Industrial Grade CF cards allow for full Fixed Disk/True IDE compatibility, including interface modes PIO up to mode 6, MW-DMA up to mode 4, and UDMA up to mode 5. This mode allows for seamless integration of CF cards as bootable solid state storage.
Highly Reliable
All ATP Industrial Grade CF and SSDs are constructed using best-in-class SLC(Single-Level Cell) components with enhanced Error Correction Code(ECC) functions and wear leveling algorithms. This results in MTBF ratings over 2 million hours and the highest write cycle lifetimes in the industry.
|
