6U PowerPC based VME SBCs

Single or Dual MPC8640 (Single or Dual Core) SBC with Embedded L2 switch and Open FPGA- For very high performance applications with up to 2 processors dual core and 4 GB of DDR2-ECC
- Optimized architecture with one central PCI-Express Switch
- Flexible combination of interfaces with up to 8 GE ports and 1 L2+ Gig Ethernet Switch
- 2 PMC/XMC slots with PCIex4 on each one
- One virtex 5 FPGA for customer applications

- MPC7448 running from 600MHz to 1.7 GHz
- 512MB or 1 GB of SDRAM-DDR with ECC
- 64 to 256MB of soldered Mirror Flash
- Up to 2 GB soldered Nand Flash
- Temperature sensor and monitoring
- two PMC sots
- Marvell DiscoveryTM III system controller
- Three Ethernet 10/100/1000TX ports with support for Jumbo frames
- One serial interface for the front console port
- Three USB2 ports High/full speed
- GPIO on P0
- A four channels SATA controller with two ports on P0 and two ports available through an on-board or front connector

- MPC8541E - e500 core running from 533 to 833 MHz
- MMU and FPU-SP capabilities
- DMA-channel controllers
- 128 or 256MB SDRAM-DDR266 with ECC
- 32 or 64 MB soldered Flash
- Two front Ethernet Giga Ethernet ports
- One front Ethernet 10/100TX port
- One RS232 console
- FPGA Cyclone 2
- Communication Processor Module providing :
- 2 or 3 additional Enhanced Multi-protocol channels (Fast Ethernet, ATM, TDM with 256 HDLC)
- 3 or 4 Async/Synchronous serial controllers (8555E/8560)
- One PMC slot